Mold cannot be eradicated from our environment. When suspecting some form of fungi particles in your room, you should consider taking mold testing in Knoxville TN to be sure if at all your wall has started developing mold growth.
Molds can be found anywhere, in places of moisture and where food source is present. Recent research made on molds shows an alarming rate of harmful fungal species due to water damage, moisture or high humidity levels in poorly maintained homes or buildings. IN most cases people mistake mold to be dust, but in this article, discussion has been made on how as a professional you can test for mold.
Procedures for mold testing Knoxville TN for a client
1.Carry out some questionnaire with the client.
Before carrying out a test for mold, as a professional, you first need to have some time with your client for some general knowledge on the building or room you will be inspecting if at all it has a mold growth. Questions such as; Has the property ever had any mold issues? Are there any areas of the property that are prone to moisture problems? Are there any current moisture issues in the property? Will help you to have some findings hence making it easy to test for mold at a specific area.
2.Walk through the building areas with client
Mold might not grow where not supported, mostly areas with high humidity supports it’s growth and spread. For a client to look for a professional he or she might have suspected some areas that he or she might need the test to be done. So as a professional in Knoxville tn, you should consider walking around with your client for easy operation within the premise.
3.Detailed visual inspection
Using infrared thermal scan, you can identify where conditions for mold are most likely. Infrared imaging through the infrared thermal scan allows you to check the location of mold in buildings, which might not be normally obvious to the naked eye thus making this object to be effective for mold testing Knoxville TN because it gives a deeper detailed images where suspected to have mold.
4.Sampling of air or surfaces
As dictated by visual observation through the infrared thermal scan, you need to have some samples for testing from the surface or air. For collection of air sample, a pump that forces air through a collection device which catches mold spores is used, while for getting surface samples you can use the Tape Lifts. This samples then should be recorded before leaving the building and to have an accurate data.
5.Transfer of samples to the laboratory
After having your air and surface samples, at the laboratory, you need to carry out a test to determine possible mold growth from the samples. The Environmental Relative Moldiness Index test that uses dust should be done to determine the likely amount of mold present in an area. This process as a professional needs your accuracy because entirely your client relies on you.
After successful finding, you need to provide the client with the report. When a mold growth is found, you need to arrange with the client on a successful mold testing Knoxville TN.
Conclusion
If you need to further your profession on mold testing, then you need to practice these procedures of testing mold discussed above.
